We needed to create a local pool (not a dhcp pool) to draw these addresses from: ip local pool vpnpool.
Next payload is 3 000924: *Jan 11 03:28:09.110 PCTime: isakmp 0 Encryption algorithm offered does not match policy!
Scheduler max-task-time 5000 scheduler allocate scheduler interval 560: *Jan 10 05:17:25.483 PCTime: isakmp 0 Encryption algorithm offered does not match policy!Ip local pool vpnpool ip forward-protocol nd ip route Dialer0 ip route no ip http server no ip http secure-server ip http timeout-policy idle 0 requests 10000!The following licenses have been activated on harrison living in the material world review my router : Technolo.Aoswan#sh run Building configuration.Current configuration : 6340 bytes!000663: *Jan 10 05:17:25.483 PCTime: isakmp 0 atts are not acceptable.Thanks again, much appreciate it!References Here are some random unsorted links to pages that I space rangers 2 reboot resolution patch found useful while figuring out how to do this).In many cases the low upload bandwidth of adsl connections, combined with internal office use of the connection.Will make a VPN impractically slow, especially compared to Amazon's unlimited upload and download bandwidth.Could this be due to the connection speed?To help cut down the configuration to just a couple of lines, this is the alternative code that would be used and have the same effect: Mark VPN Traffic to be tunnelled: R1(config access-list 120 remark Cisco VPN Users R1(config access-list 120 permit ip R1(config.000596: *Jan 9 10:11:47.830 PCTime: isakmp 0 atts are not acceptable.Anything special that needs to be configured on the Cisco VPN Client other than a regular "new connection"?Overkill join: Peterborough, ON Change: crypto isakmp policy 1 encr aes 256 authentication pre-share group 2 to: crypto isakmp policy 1 encry 3des authentication pre-share group 2 lifetime 3600 And no crypto isakmp key address That is for site-to-site VPN's.This is how the server decides which configuration to send to the client.I couldn't find simple documentation on setting it up, so I used the Cisco Easy VPN Remote example, extracting just the bits we needed to route only the /24 subnet through the tunnel.I also included real media player gratis italiano the debug output from the term mon.Im also starting to wonder if it could be some misconfiguration on the Clients side?Interface Dialer0 ip address negotiated no ip redirects no ip unreachables no ip proxy-arp ip mtu 1452 ip flow ingress ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname ppp chap.
Crypto isakmp policy 1 encr 3des authentication pre-share group 2 lifetime 3600!
Next payload is 3 000932: *Jan 11 03:28:09.110 PCTime: isakmp 0 Encryption algorithm offered does not match policy!